EPC-A10/A12 Web Guiding Control System Web Guide System

• Customization: Available
• Warranty: 1 Years
• Working Method: Servo Deviation Rectification
• Model NO.: EPC-A10/A12
• Roller Length: 600mm(Different Models Different Roller Length)
• Web Width Range: 100mm-570mm
• Maximum Tension: 300n.M
• Power Input: AC220V/80W
• Maximum Drive Speed: 40mm/S
• Cirmustance Temperature: -10~60ºC, Below Rh90%
• Delivery Time: 8-15 Days Based on Different Dimension
• Transport Package: Carton Box
• Origin: China
• HS Code: 9032899090
• Production Capacity: 5000pieces/Year

Product Description

Features	1,It Support three working methods of line tracking, edge tracking, centering tracking, etc. 2,Support photoelectric sensor, ultrasonic sensor, CCD sensor. 3,The Automatic detection of sensor parameters, no need to calibrate the sensor in most environments. 4,Automatic stroke measurement without mechanical limit switch. 5,Ultra-high-speed response with 500 microseconds (0.5 milliseconds). 6,The DC servo motor drives the ball screw. 7,And Support Simplified Chinese/Traditional Chinese/English Languages. 8,The humanized operation, quick and easy. 9,Contains German pneumatic control components, automatic Splice.
Description	Coil materials refer to long-sized continuous materials such as paper, film, sheet, non-woven fabric, metal foil, silk, thread, etc.   In the process of uncoiling, technological processing, winding, etc, deviation of the coil materials may occur. Due to the deviation of the coil itself or the processing machine. The all-in-one web guiding system machine provides a solution to reduce the occurrence of such situations. The system always tracks the position of the coil material during the production and makes corrections in real-time.
Advantages	1. Track the edge of the substrate, correct the unevenness of the substrate when winding. 2. Track the edge of the substrate to keep the coating material equidistant from the edge. 3. According to roll speeds of different materials, the correction speed can be adjusted to keep balance with it.
Working Principle	The web guiding system is a closed-loop controller.   First, the sensor detects the edge or line of the coil, and the system automatically reads the deviation of the actual position. And setting the position of the coil and converts the offset into an electrical signal. They send the signal to the controller. After that the signal is calibrated by the controller, it is outputted to the linear driver. The linear driver drives the deviation correction according to the magnitude of the signal. Then the guide mechanism adjusts the coil to the set position. The drive signal of the current drive is only proportional to the deviation of the coil, which makes it possible to provide precise control for various coils.

Product Description

 

Web guide system Product Features:

1. Brushless servo motor drive, maintenance-free

2. Precision ball screw, accurate positioning

3. The guiding stroke is large

4. Can be customized guide roller length and span

5. The guide roller can be optionally equipped with a hard anodized coating, rubber layer, wrap cork.

6. Can add the splicing table & clip based on customers' needs,see below picture.

Web guide system Without Splicing Table & Clip

Web guide system With Splicing Table & Clip


Web guide system Specification:
 

Model   No.	Roller Length L (mm)	Roller Dia. D(mm)	Roller Width C  (mm)	Slide Block Height B (mm)	Base Length Y (mm)	Web Guide range (degree°)	Max.   Tension (N)
PG-200A	200	50	230	25	260	±17	300
PG-250A	250	50	230	25	260	±17	300
PG-300A	300	60	260	25	310	±17	300
PG-350A	350	60	260	25	360	±17	300
PG-400A	400	60	320	35	410	±17	500
PG-450A	450	60	320	35	460	±17	500
PG-500A	500	60	320	35	510	±17	500
PG-600A	600	60	320	35	610	±17	500

Drawing

Application

Application

*Textile machinery: fiber twisters, treatment machines, weaving machines

* Metal fishing systems: extruders, wire stretchers, presses, welders, steel wire retractors, cutters, pipe makers, wire winding machines
*Machine tool systems: lathes,
* Millers, steel extruders, CNC lathes, specialized machinery
* Transportation equipment: hoists, feeders, conveyors, rollers, winders
* Paper- making systems: bag-making machines, box-making machines, slitters, book-making machinery, cutters, copy paper machines

 

 

Packaging

Company Profile

 

About Us
DongGuan HongJun Packaging Technology Co.,Ltd ,in the fields of R&D, manufacturing and sales of web guiding system, expanding shafts, core adapters for converting machines,rewinding machines and other equipments. Since our establishment, we have been aggressive, pioneering and innovative, and operating with integrity. Due to our strict product quality and the unremitting efforts of all the company's colleagues, we have been widely used in packaging machinery, printing machinery, wire and cable machinery, paper and plate machinery, rubber Plastic machinery, food machinery, textile machinery, glass machinery, woodworking machinery, electronic battery machinery and other equipment industries.
FAQ


Order Details

Item Name	PG-600A Offset Pivot Guide
MOQ(Minimum Order Quantity)	1pc
Lead time	8-15 days after receiving the deposit
Calculated Packing Size	Need to account
Package	Wooden Box
Price Term	EXW,FOB, CIF, etc
Payment term	TT, L/C,Western Union
Country of Origin	China